Commands follow a pattern. They start with gcloud, then a product, then the thing you are working with, then an action, and they finish with a name and any options. In gcloud compute instances list, compute is the product, instances is the resource, and list is the action. Once you see that pattern, you can guess many commands and look up the rest with the help flag.<\/p>\r\n
This is a working reference. It covers the commands for VMs, setting up gcloud, managing components, projects, and listing zones, regions, machine types, images, and accounts, with the screenshots from the original page in their original order.<\/p>\r\n
Prerequisites:<\/strong><\/p>\r\n gcloud compute instances list<\/p>\r\n Lists the VM instances in your current project.<\/p>\r\n\r\n\r\n\r\n gcloud compute instances start INSTANCE_NAME –zone=ZONE<\/p>\r\n Starts a stopped VM.<\/p>\r\n\r\n\r\n\r\n gcloud compute instances stop INSTANCE_NAME –zone=ZONE<\/p>\r\n Stops a running VM. A stopped VM generally stops billing for its compute, but its disks and any reserved addresses still cost money.<\/p>\r\n\r\n\r\n\r\n gcloud compute instances delete INSTANCE_NAME –zone=ZONE<\/p>\r\n Deletes the VM, and gcloud asks you to confirm with y. Be careful here. A VM’s boot disk is deleted along with it by default, and deleting cannot be undone, so check the name and the zone before you confirm.<\/p>\r\n\r\n\r\n\r\n gcloud compute instances create INSTANCE_NAME –zone=ZONE –machine-type=MACHINE_TYPE –boot-disk-size=DISK_SIZE<\/p>\r\n A filled in example looks like this, with the flag name, an equals sign, and the value, and no spaces:<\/p>\r\n gcloud compute instances create my-vm –zone=us-central1-a –machine-type=e2-medium –boot-disk-size=20GB<\/p>\r\n The original page wrote the flags with an en dash and spaces after the equals signs, which makes the command fail. If you leave out the zone, gcloud asks you to choose one from a numbered list, as the next screenshot shows.<\/p>\r\n\r\n\r\n\r\n Choose the zone which you want by specifying the respective number, and press enter.<\/p>\r\n\r\n\r\n\r\n gcloud init<\/p>\r\n Walks you through signing in and choosing your defaults.<\/p>\r\n\r\n\r\n\r\n Choose the project you want to work with by typing its number. You can also create a new project here. Then choose the region and zone, typing y to set a new default or n to keep the current one.<\/p>\r\n\r\n\r\n\r\n You can change defaults later without running the whole setup again, for example to set a default zone, and to see what is currently set:<\/p>\r\n gcloud config set compute\/zone ZONE Components are the installable parts of the Google Cloud CLI. One important limit applies to all four commands in this section. Google says the component manager is disabled when gcloud was installed with a package manager such as APT or yum, so these commands will not work on that kind of install. Install extra components with the same package manager instead.<\/p>\r\n gcloud components list<\/p>\r\n Shows which components are installed and which are not.<\/p>\r\n\r\n\r\n\r\n gcloud components install COMPONENT_ID<\/p>\r\n Installs a component. On a system wide install, you need administrator access to install or remove components.<\/p>\r\n\r\n\r\n\r\n A command window shows the installation. Press y to confirm.<\/p>\r\n\r\n\r\n\r\n gcloud components remove COMPONENT_ID<\/p>\r\n Removes a component. Check the ID first, since other commands may depend on it. A command window opens, and you press y to confirm.<\/p>\r\n\r\n\r\n\r\n gcloud components update<\/p>\r\n Updates your installed components. When asked, press y.<\/p>\r\n\r\n\r\n\r\n gcloud projects list<\/p>\r\n Shows the projects you have access to.<\/p>\r\n\r\n\r\n\r\n gcloud config set project PROJECT_ID<\/p>\r\n Every later command runs against this project unless you override it.<\/p>\r\n\r\n\r\n\r\n gcloud projects create PROJECT_ID<\/p>\r\n The project ID has to be unique across all of Google Cloud, so no other project anywhere can already use it. It must also follow the ID rules in the Google Cloud Platform and Project Creation guide in this series. Creating a project does not link it to a billing account, so the project cannot use paid resources until you do that. The Enabling Billing guide in this series covers it.<\/p>\r\n\r\n\r\n\r\n gcloud compute zones list<\/p>\r\n\r\n\r\n\r\n gcloud compute regions list<\/p>\r\n\r\n\r\n\r\n gcloud compute machine-types list<\/p>\r\n\r\n\r\n\r\n gcloud compute images list<\/p>\r\n\r\n\r\n\r\n These listings can run to hundreds of lines. Google’s gcloud cheat sheet points out that you can narrow any list with the filter, format, limit, and sort flags. For example, this lists VMs whose zone starts with us and which are not the f1 micro machine type:<\/p>\r\n gcloud compute instances list –filter=”zone ~ ^us AND -machineType:f1-micro”<\/p>\r\n gcloud auth list<\/p>\r\n Lists the accounts gcloud is signed in with, and marks the active one. It is worth running before any destructive command, so you know which account and project you are about to change.<\/p>\r\n\r\n\r\n\r\n\r\n
Commands for Working With VMs<\/h2>\r\n
List Your VMs<\/h3>\r\n
![\"\"](\"https:\/\/prwatech.in\/blog\/wp-content\/uploads\/2021\/03\/19.jpg\")
<\/figure>\r\n<\/div>\r\n\r\n\r\n\r\nStart a VM<\/h3>\r\n
![\"\"](\"https:\/\/prwatech.in\/blog\/wp-content\/uploads\/2021\/03\/10-1-1024x257.jpg\")
<\/figure>\r\n<\/div>\r\n\r\n\r\n\r\nStop a VM<\/h3>\r\n
![\"\"](\"https:\/\/prwatech.in\/blog\/wp-content\/uploads\/2021\/03\/11-2-1024x186.jpg\")
<\/figure>\r\n<\/div>\r\n\r\n\r\n\r\nDelete a VM<\/h3>\r\n
![\"\"](\"https:\/\/prwatech.in\/blog\/wp-content\/uploads\/2021\/03\/12-3-1024x293.jpg\")
<\/figure>\r\n<\/div>\r\n\r\n\r\n\r\nCreate a VM<\/h3>\r\n
![\"\"](\"https:\/\/prwatech.in\/blog\/wp-content\/uploads\/2021\/03\/13-2-1024x292.jpg\")
<\/figure>\r\n<\/div>\r\n\r\n\r\n\r\n![\"\"](\"https:\/\/prwatech.in\/blog\/wp-content\/uploads\/2021\/03\/14-2-1024x403.jpg\")
<\/figure>\r\n<\/div>\r\n\r\n\r\n\r\nSetting Up gcloud<\/h2>\r\n
Initialize gcloud<\/h3>\r\n
![\"\"](\"https:\/\/prwatech.in\/blog\/wp-content\/uploads\/2021\/03\/15-3.jpg\")
<\/figure>\r\n<\/div>\r\n\r\n\r\n\r\n![\"\"](\"https:\/\/prwatech.in\/blog\/wp-content\/uploads\/2021\/03\/16-2.jpg\")
<\/figure>\r\n<\/div>\r\n\r\n\r\n\r\n
gcloud config list<\/p>\r\nManaging gcloud Components<\/h2>\r\n
List Components<\/h3>\r\n
![\"\"](\"https:\/\/prwatech.in\/blog\/wp-content\/uploads\/2021\/03\/1-5-1024x372.jpg\")
<\/figure>\r\n<\/div>\r\n\r\n\r\n\r\nInstall a Component<\/h3>\r\n
![\"\"](\"https:\/\/prwatech.in\/blog\/wp-content\/uploads\/2021\/03\/20.jpg\")
<\/figure>\r\n<\/div>\r\n\r\n\r\n\r\n![\"\"](\"https:\/\/prwatech.in\/blog\/wp-content\/uploads\/2021\/03\/17-2.jpg\")
<\/figure>\r\n<\/div>\r\n\r\n\r\n\r\nRemove a Component<\/h3>\r\n
![\"\"](\"https:\/\/prwatech.in\/blog\/wp-content\/uploads\/2021\/03\/18.jpg\")
<\/figure>\r\n<\/div>\r\n\r\n\r\n\r\nUpdate Components<\/h3>\r\n
![\"\"](\"https:\/\/prwatech.in\/blog\/wp-content\/uploads\/2021\/03\/2-6.jpg\")
<\/figure>\r\n<\/div>\r\n\r\n\r\n\r\nWorking With Projects<\/h2>\r\n
List Projects<\/h3>\r\n
![\"\"](\"https:\/\/prwatech.in\/blog\/wp-content\/uploads\/2021\/03\/3-6.jpg\")
<\/figure>\r\n<\/div>\r\n\r\n\r\n\r\nSet the Project You Are Working In<\/h3>\r\n
![\"\"](\"https:\/\/prwatech.in\/blog\/wp-content\/uploads\/2021\/03\/4-8.jpg\")
<\/figure>\r\n<\/div>\r\n\r\n\r\n\r\nCreate a Project<\/h3>\r\n
![\"\"](\"https:\/\/prwatech.in\/blog\/wp-content\/uploads\/2021\/03\/21-1.jpg\")
<\/figure>\r\n<\/div>\r\n\r\n\r\n\r\nListing Zones, Regions, Machine Types, and Images<\/h2>\r\n
List Zones<\/h3>\r\n
![\"\"](\"https:\/\/prwatech.in\/blog\/wp-content\/uploads\/2021\/03\/5-6.jpg\")
<\/figure>\r\n<\/div>\r\n\r\n\r\n\r\nList Regions<\/h3>\r\n
![\"\"](\"https:\/\/prwatech.in\/blog\/wp-content\/uploads\/2021\/03\/6-6.jpg\")
<\/figure>\r\n<\/div>\r\n\r\n\r\n\r\nList Machine Types<\/h3>\r\n
![\"\"](\"https:\/\/prwatech.in\/blog\/wp-content\/uploads\/2021\/03\/7-5.jpg\")
<\/figure>\r\n<\/div>\r\n\r\n\r\n\r\nList Images<\/h3>\r\n
![\"\"](\"https:\/\/prwatech.in\/blog\/wp-content\/uploads\/2021\/03\/8-6.jpg\")
<\/figure>\r\n<\/div>\r\n\r\n\r\n\r\nChecking Which Account You Are Using<\/h2>\r\n
![\"\"](\"https:\/\/prwatech.in\/blog\/wp-content\/uploads\/2021\/03\/9-2.jpg\")
<\/figure>\r\n